Aquawrap® Black

High Strength/Modulus Carbon Fabric Construction

AquaWrap® Black is a high strength high modulus repair and reinforcement system for existing mechanical systems, structures and piping. This product is especially suited for the economical repair of large piping systems. Furnished factoryimpregnated with our proprietary urethane resin system. It is odorless and solvent-free. Cured Aquawrap® is a very durable, high long term strength material, impervious to fuels, most chemicals and solvents. It permanently bonds to a wide variety of surfaces such as metals, composites, concrete, plastics and wood.

AquaWrap® is ready to apply, right out of the bag and cures by way of a chemical reaction with field-applied water. This offers considerable advantages over conventional cloth-resin systems in that there is no resin measuring, mixing, spreading, solvents, or dripping polymer mess.

Product Properties

Working Time:	30-40 min. at 25°C (77°F)	Mix Ratio:	No mixing required
Aplication Temps:	4-93°C (40-200°F)	Service Temps:	-18 - 121°C (0 - 250°F)
Cure Time	30-60 minutes at 25°C (77°F)	Full Cure	7 days at 25°C (77°F)
Usual Packing:	Pre-Packaged Rolls	Shelf Life:	1 year
Chemical Resistence:	Acetone, mek, toluene, gasoline, ethyl alcohol and many others	Hardness:	90 Shore D - ASTM D-2240

Compostie Properties

Test	C-2 FABRIC
Tensile Strength (warp direction). psi	77605
Tensile Strength (fill direction), psi	48,330
Tensile Modulus (warp direction), msi	6.45
Tensile Modulus (fill direction), msi	3.65
Tensile load per ply (warp direction), pounds per inch of width	2897
Tensile load per ply (fill direction), pounds per inch of width	1787
Thickness, mils	.037
HDT, °F	325
CTE,in/in °F	8.7 e^-6
Tg °F	288
Bond strength to steel with BP-1 Adhesive, psi	1000 (est)

Attention

All of the following data are based on laboratory conditions, at room temperature. Field conditions can radically change the characteristics of this product. Higher temperatures will lessen the working life of the product. Allow adequate time for application. Field testing is strongly recommended prior to application.

Storage

Store at 60-90° F in a dry place. Keep from freezing. Dispose of any leftover material.

Handling

Aquawrap® iis shipped in a sealed protective bag to protect it from atmospheric moisture. Because it cures with the application of water (and air humidity), care must be taken in handling the sealed bags to prevent puncturing or scuffing, which would cause the product to cure in the bag. Once the bag is opened and the Aquawrap® is exposed to the humidity in the air, it will begin to cure and will gel within about 60 minutes. Therefore, work must be well planned prior to opening the bag. Aquawrap® requires no other special handling or application procedures. This resin is slightly irritating to certain sensitive people; it will give off a small amount of carbon dioxide vapor while curing; and the cured resin is permanent and very difficult to remove, so gloves, safety glasses and other personnel protection equipment appropriate for the task must be used.

Shelf Life

12 months from date of sale, in an unopened package, stored in cool warehouse conditions.

Explore

Home About Services Products Industries Contact Us

Contact Info

1766 West Sam Houston Pkwy N, Houston, TX 77043 s.sales@seteinllc.com service@seteinllc.com +1 281-606-0798 +1 281-459-0080

Aquawrap® Bandages